Seagull Models GROB TUTOR G115 Assembly Manual page 28

GROB TUTOR G115
RUDDER PUSHROD HORN
INSTALLATION.
Elevator pushrod.
Pen.
M2 lock nut.
8mm
28
Rudder pushrod.
Metal clevis.
Snap keeper.
8mm.
Instruction Manual.
Wire keeper.
Rudder control horn.
Elevator control horn.
INSTALLATION PILOT.
1) A scale pilot is included with this ARF. The
Seagull Pilot included fitting well to the cockpit.
(or you can order others scale pilot figures
made by Seagull factory. They are available at
Seagull distributors.)
If you are going to install a pilot figure, please
use a sanding bar to sand the base of the figure
so that it is flat.
2
2) Position the pilot figure on the canopy floor
as show. Locate the oval shaped on the canopy
floor and remove the covering. Use epoxy to
glue this into the base of the pilot figure, please
see pictures as shown.
1
3