Seagull Models GROB TUTOR G115 Assembly Manual page 27

www.seagullmodels.com
Elevator control horn.
Rudder control horn.
3) Thread one clevis and M2 lock nut on
to each elevator control rod. Thread the horns
on until they are flush with the ends of the con-
trol rods.
4) Elevator and rudder pushrods assembly
as pictures below.
Pen.
652mm.
Cut.
Elevator pushrod.
Control horn.
8mm.
M2 lock nut.
Metal clevis.
Wire keeper.
8mm.
8mm.
27