Removing The Audio "Dj" Module - EUROCOM D500P Service Manual

Disassembly

Removing the Audio "DJ" Module

Figure 2 - 16
Audio "DJ"
1. Remove the battery
Module Removal
2 -
Sequence
2. When the top and bottom case assemblies are separated, the Audio "DJ" module will be visible.
3. Disconnect the microphone cable
a. Disconnect the mi-
(Figure 2 -
crophone and Audio
"DJ" cables. 4. Remove screws
b. Remove the mod-
3
ule.
c. Remove the 4
screws to separate
a.
the board, module
and power button.
1. Microphone Cable
2. Audio "DJ" Cable
3. Audio "DJ" Module
8. Audio "DJ" Board
9. Power Button
• 4 Screws
2 - 20 Removing the Audio "DJ" Module
(page 2 - 7), bay one device
10), keyboard (page 2 - 11) CPU
1
16b).
- from the back of the Audio "DJ" board in order to separate the board
4 7
and power button (Figure 2 -
9
c.
7
6
5
4
8
9
(page 2 - 8), hard disk assembly
(page 2 - 13), palm rest (page 2 -
, the Audio "DJ" cable , then carefully remove the Audio "DJ" module
2
16c).
b.
1
3
(page 2 - 9), bay two device
17) and bottom case (page 2 - 18).
from the module
8
2
(page
3
1