General Information - Toro Reelmaster 5210 Service Manual

General Information

Traction Unit Operator's Manual
The Traction Unit Operator's Manual provides informa-
tion regarding the operation, general maintenance and
maintenance intervals for your Reelmaster machine.
Refer to that publication for additional information when
servicing the machine.
Check Hydraulic Fluid
The hydraulic system on Reelmaster 5010 series ma-
chines is designed to operate on high quality hydraulic
fluid. The hydraulic system reservoir holds approxima-
tely 11 gallons (41.6 liters) of hydraulic fluid. Check lev-
el of hydraulic fluid daily. See Traction Unit Operator's
Manual for fluid level checking procedure and hydraulic
oil recommendations.
Towing Traction Unit
IMPORTANT: If towing limits are exceeded, severe
damage to the piston (traction) pump may occur.
If it becomes necessary to tow or push the machine, tow
or push at a speed below 3 mph (4.8 kph), and for a very
short distance. If the machine needs to be moved a con-
siderable distance, machine should be transported on a
trailer. The piston (traction) pump is equipped with a by-
pass valve that needs to be loosened for towing or push-
ing (Fig. 2). See Traction Unit Operator's Manual for
Towing Procedures.
Reelmaster 5010 Series
1. Hydraulic reservoir cap
1. Piston (traction) pump
Page 4 - - 3
1
Figure 1
2
Figure 2
2. Bypass valve
Hydraulic System (Rev. C)
1