Installing The Pci Riser-Card Bracket To The Riser Card - IBM System x3550 M3 Type 4254 Problem Determination And Service Manual

6. If you are instructed to return the PCI bracket, follow all packaging instructions,

Installing the PCI riser-card bracket to the riser card

To install the PCI riser-card bracket to the riser card, complete the following steps:
10. Reconnect the power cords and any cables that you removed.
11. Turn on the peripheral devices and the server.
236
IBM System x3550 M3 Types 4254 and 7944: Problem Determination and Service Guide
and use any packaging materials for shipping that are supplied to you.
1. Read the safety information that begins on page vii and the "Installation
guidelines" on page 167.
2. Turn off the server and peripheral devices and disconnect the power cords and
all external cables.
3. Remove the cover (see "Removing the cover" on page 174).
4. Align the holes on the PCI riser card and the PCI bracket and install the screw
that attaches the PCI riser card to the PCI bracket.
5. If you need to install an adapter, see "Installing an adapter" on page 180.
6. Install the PCI riser card assembly (see "Installing a PCI riser-card assembly"
on page 235).
7. Reconnect the cables for the adapter.
8. Install the cover (see "Installing the cover" on page 174).
9. Slide the server into the rack.