Returning a device or component
If you are instructed to return a device or component, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to you.
Internal cable routing and connectors
The following illustration shows the internal routing and connectors for the two SAS
signal cables (in server models with eight drive bays).
Notes:
1. To connect the SAS signal cables, make sure that you first connect the signal
2. To disconnect the SAS signal cables, make sure that you first disconnect the
The following illustration shows the internal routing and connector for the optional
optical drive cable.
Attention:
connector release tab, and then disconnect the cable from the connector on the
system board. Do not disconnect the cable by using excessive force.
170
IBM System x3550 M3 Types 4254 and 7944: Problem Determination and Service Guide
cable, and then the power cable and configuration cable.
power cable, and then the signal cable and configuration cable.
To disconnect the optional optical drive cable, you must first press the