IBM System x3550 M3 Type 4254 Problem Determination And Service Manual page 95

Table 6. IMM error messages (continued)
v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 4, "Parts listing, System x3550 M3 Types 4254 and 7944," on page 159 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
ENET[0] DHCP-HSTN=%1, DN=%2,
IP@=%3, SN=%4, GW@=%5,
DNS1@=%6.
(%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 =
CIM_DNSProtocolEndpoint.DomainName;
%3 =
CIM_IPProtocolEndpoint.IPv4Address;
%4 =
CIM_IPProtocolEndpoint.SubnetMask;
%5 = IP address, xxx.xxx.xxx.xxx; %6 =
IP address, xxx.xxx.xxx.xxx)
ENET[0] IP-Cfg:HstName=%1, IP@%2,
NetMsk=%3, GW@=%4.
(%1 =
CIM_DNSProtocolEndpoint.Hostname;
%2 =
CIM_StaticIPSettingData.IPv4Address;
%3 =
CIM_StaticIPSettingData.SubnetMask;
%4 = CIM_StaticIPSettingData.
DefaultGatewayAddress)
LAN: Ethernet[0] interface is no longer
active.
LAN: Ethernet[0] interface is now active. Info
DHCP setting changed to by user %1.
(%1 = user ID)
IMM: Configuration %1 restored from a
configuration file by user %2.
(%1 = CIM_ConfigurationData.
ConfigurationName; %2 = user ID)
Info The DHCP server has
assigned an IMM IP
address and configuration.
Info An IMM IP address and
configuration have been
assigned using client data.
Info The IMM Ethernet interface
has been disabled.
The IMM Ethernet interface
has been enabled.
Info A user has changed the
DHCP mode.
Info A user has restored the
IMM configuration by
importing a configuration
file.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
No action; information only.
77
Chapter 3. Diagnostics