Installing The Microprocessor 2 Air Baffle - IBM System x3550 M3 Type 4254 Problem Determination And Service Manual

Installing the microprocessor 2 air baffle

To install the air baffle, complete the following steps:
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Align the microprocessor 2 air baffle tab with the hole on the side of the
3. Install the cover (see "Installing the cover" on page 174).
4. Slide the server into the rack.
5. Reconnect the power cords and any cables that you removed.
6. Turn on the peripheral devices and the server.
176
IBM System x3550 M3 Types 4254 and 7944: Problem Determination and Service Guide
Hole for baffle tab
on page 167.
power-supply cage; then insert the tab into the hole on the cage (make sure
that the front end of the air baffle is lined up with the blue touch point tab on the
left side of fan 6). Press the air baffle down until it is securely seated.
Hole for baffle tab
Baffle tab
Baffle tab
Microprocessor 2
air baffle
Microprocessor 2
air baffle