Adding, Modifying And Deleting The Decoder; Adding The Decoder To The Client Software - HIKVISION DS-6400HDI-T User Manual

User Manual of DS-6400HDI-T Decoder
Run the disk of iVMS-4200 software, and double click the icon to install it in your PC. In this chapter, the basic
procedure of operating the decoder by the software is described.
Please refer to the user manual of iVMS-4200 for more detailed information.
The following figure shows the main interface after accessing to the software:
Note: The software is capable of many functions as the controlling and managing for many devices, such as the
DVR, NVR and so on. In this manual, only the operation related to the decoder is introduced.
5.1 Adding, Modifying and Deleting the
Decoder

5.1.1 Adding the Decoder to the Client Software

Steps:
Click in the control panel to enter the decoding device management interfaces.
1.
37