Table of Contents
Advertisement
User Manual of DS-6500DI–T Universal Network Decoder
Click OK to save the settings and back to the Cycle Decoding interface, or click Back to back to the Cycle
5.
Decoding interface without saving.
Repeat Step4 and Step5 to edit other input streams for cycle decoding.
6.
You can also click Delete to remove the configured input stream from the list.
Note:
Up to 64 input streams can be configured for each cycle decoding channel.
Click Save to save the configuration of input streams for the cycle decoding.
7.
Example:
Configuration: Decoding Channel: Channel 1, Cycle Time: 10 seconds, input streams configured for decoding:
10.
Result: the video streams from these 10 input channels will be decoded by decoding channel 1 and displayed on
the screen in sequence with the duration of 10 seconds for each.
4.1.4 Enabling/Disabling the Decoding Channel
Purpose:
The Channel On/Off function enables you to start or stop the decoding and displaying for certain channels.
Steps:
Click Decode Operation > Decode Control > Channel On/Off to enter the following interface:
1.
Figure 4.12 Edit Cycle Decoding of a Channel
Figure 4.13 Configure Input Streams for Decoding
21
Advertisement
Table of Contents
