Cycle Decoding Control - HIKVISION DS-630XDI Series User Manual

Voice control
Right click the decoding window, choose "Open voice" to open voice; When the voice is on, right click the
decoding window, choose "Close voice" to close voice.
Attention : Only the stream type "Audio & Video" can support the function "Open voice".
Decoding image control
Choose the decoding window, and the image display area will show the current decoding image.
Click icon to stop image display .When the image display is off, click to start the image display.
When in preview state, click to capture the current picture for local storage. Click the icon to start
recording and then the state of the icon will be , click again to stop recording.

4.5.2 Cycle decoding control

Select a window division of a decoder, drag one device node to it, then this decode division will cycle decode all
the channels of this device. The decoder video display area will display the real-time video, and the state area will