Minolta EPI 054 User Manual page 66

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
1139D214AA
1139D215AA
1139D216AA
1139D217AA
1139D218AA
11. Snap off two E-rings to remove the Exit/Duplex
Switching Plate.
12. Remove one screw and the Photoswitch Mounting
Bracket.
13. Remove two screws and the Exit Rolls Mounting
Bracket Unit.
NOTE
When reinstalling the Exit Rolls Mounting Bracket Unit,
make sure that the Reinforcement Plate Unit is in con-
tact with the Exit Rolls Mounting Bracket Unit as shown
on the left.
14. Snap off two E-rings to remove the Exit Roller.
15. Remove the harness from the clamp.
16. Remove two screws and the Reinforcement Plate
Unit.
D-47