Minolta EPI 054 User Manual page 289

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 TROUBLESHOOTING
98.05.15
Paper Feed Cabinet Take-Up Misfeed Clearing Procedure
Symptom Step
• Paper is not
Does the paper being used
taken up at all. 1 meet product specifica-
tions?
• Paper is station-
Is the paper curled, waved,
ary before the
2 or damp?
Paper Take-Up
Sensor.
Is the Paper Take-Up Motor
turning when the Start Key
3
is pressed?
Is the Paper Take-Up Roll
or Separator Roll deformed,
4
worn, or dirty with paper
dust?
• Paper is station-
Check 3rd Drawer Paper
ary before the Take-Up Sensor PC21.
Vertical Trans- See p. T-2.
5
port PC21: (PF-112) PWB-A
Rollers. IC1A PE3.
Is Vertical Transport Motor
M21 turning when the Start
6
Key is pressed?
Is the Vertical Transport
Roller or Guide Plate
7
deformed, worn, or dirty
with paper dust?
• Paper is
Check Vertical Transport
stationary near Sensor 4 PC22.
Vertical Trans- See p. T-2 (PF-112) PWB-A
8
port Sensor 4 IC1A PC2.
PC22.
• Paper is
Check Vertical Transport
stationary Sensor 4 PC22.
before the See p. T-2 (PF-112) PWB-A
9
copier. IC1A PC2.
Is the Vertical Transport
Roller or Guide Plate
deformed, worn, or dirty
10
with paper dust?
Check Item Result
NO
YES
NO
YES
YES
NO
NO
YES
YES
NO
YES
NO
YES
NO
T-21
Action
Instruct the user to use the
paper that meets product
specifications.
Change the paper.
Instruct the user in how to
store the paper.
Check for possible overload.
Replace PWB-A or PF-112
PWB-A.
Check the Motor.
Clean or replace the Paper
Take-Up or Separator Roll.
Replace PWB-A or PF-112
PWB-A.
Check the Actuator for
operation.
Check the Paper Take-Up
Sensor.
Check for possible overload.
Replace PWB-A or PF-112
PWB-A.
Check the Motor.
Clean or replace the
Vertical Transport Roller or
Guide Plate.
Replace PWB-A or PF-112
PWB-A.
Check the Actuator for
operation and check the
Sensor.
Replace PWB-A or PF-112
PWB-A.
Check the Actuator for
operation and check the
Sensor.
Clean or replace the Verti-
cal Transport Roller or
Guide Plate.
Check the Paper Feed Cab-
inet for positive connection
to the copier.