Minolta EPI 054 User Manual page 246

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
Function No.
U-23
Select whether to activate the auto clear (panel reset) function when
For 18/23 cpm
the Plug-In Counter is pulled out.
Copier only
Data
Description Auto clear is not activated.
U-24
Select whether to enable or disable the function that automatically
For 18/23 cpm
switches between the Sort and Non-Sort mode depending on the
Copier only
number of originals loaded in the ADF when the copier is equipped
with an ADF and finishing option.
Data
Description
U-28
Select whether or not to enable the auto power OFF function that
turns power off automatically after the lapse of a given period of time
after a copy cycle has been completed or a key on the control panel
has been operated.
Data
0
1
2
.
.
30
30: 15/18 cpm Copier
NOTES
1. Except for 0 and 99, the setting data equals the time in minutes.
2. "0" cannot be selected for this function if U-7 (Auto Power OFF
Disabling) available as one of the User Mode functions is set to
"0."
U-51 to 54
Designates each drawer of the copier for special paper.
For 23 cpm
Copier only
U-51: 1st Drawer
U-52: 2nd Drawer
U-53: 3rd Drawer
U-54: 4th Drawer
NOTE
The APS mode is disabled if "1" is set.
[User Mode]
Setting (The default is
Highlighted
<Auto Clear for Plug-In Counter>
0
<Sort/Non-Sort Switching ON/OFF>
0
OFF (disabled)
<Auto Power OFF Timing>
Description Data
Disabled
60
Enabled: 1 min.
.
Enabled: 2 min.
.
.
97
.
98
Enabled: 30 min.
99
60: 23 cpm Copier
<Special Paper Setting>
Data
Description Plain paper
S-15
.)
1
Auto clear is activated.
1
ON (enabled)
Description
Enabled: 60 min.
.
.
Enabled: 97 min.
Enabled: 98 min.
Enabled: 240 min.
1
0
Special paper