Nfa Firmware History; Delivery Firmware History - Ricoh B051 Service Manual

Firmware History for B051/B052

5.3 NFA FIRMWARE HISTORY:

Initial Production Release
Corrects the following:
•
Following delivery, the next Rx document cannot be delivered to the server, even if the
machine is connected to the server. The machine does not enter the auto off mode after
the waiting Rx document for delivery has been deleted.
Corrects the following:
•
Supports File Format Converter (Media Link Board) function.
Corrects the following:
•
The machine sometimes does not enter Auto Off mode when the operation switch is
turned OFF following Plumeria capturing, fax reception or remote delivery.

5.4 DELIVERY FIRMWARE HISTORY:

Initial Production Release
Corrects the following:
•
If the operation SW is pressed while the machine is scanning the third set of 2000
originals (SADF mode), the machine goes into auto off mode.
Corrects the following:
•
Operation flow for multiple scanning in platen mode improved.
Corrects the following:
•
Minor delivery module bug.
Corrects the following:
•
Supports the File Format Converter (Media Link Board) function
Corrects the following:
•
Attached file is sometimes delivered as a text file.
Corrects the following:
•
File full condition may occur following repeated connections to the POP server with
APOP auto connection.
CÓPIA NÃO CONTROLADA
SYMPTOM CORRECTED
SYMPTOM CORRECTED
CÓPIA NÃO CONTROLADA
FIRMWARE
VERSION
1.26
1.27
1.66
1.67
FIRMWARE
VERSION
1.01
1.05
1.13
1.15
2.00
2.02
2.03
Page 33 of 37