Level 1 and 2 Service Manual
Removing and Replacing the Rear Housing
G
G
6809501A48-A
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery cover, battery, and memory card as described in the
procedures.
In addition to 2 screws, the rear housing assembly is fastened with plastic latches.
These are fragile and should be released with care.
2.
Using a Torx driver with a T-6 bit, remove the screws at each side of the phone.
Retain the screws for reassembly. See Figure 4.
Screw
Figure 4. Removing the Rear Housing Screws
November 03, 2006
Screw
Disassembly
Battery Insulator
051343o
21