Table of Contents
Advertisement
Disassembly
Removing and Replacing the Rear Housing
G
G
18
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery cover, battery, USIM and memory card as described in the procedures.
In addition to 2 screws, the rear housing assembly is fastened with plastic latches.
These are fragile and should be released with care.
2.
Using a Torx driver with a T-6 bit, remove the screws at each side of the phone. Retain the
screws for reassembly. See Figure 4.
Figure 4. Removing the Rear Speaker Housing Screws
3.
Release the four housing latches by inserting the flat end of the plastic disassembly tool
into the openings on the rear housing.
Figure 5. Removing the Rear Housing Latches
September 26, 2006
Housing Screw
Housing Screw
Housing Latch
Housing Latch
6809505A63-O
V3xx
061425o
Housing Latch
Housing Latch
061426o
Advertisement
Table of Contents
