Removing And Replacing The Transceiver Board Assembly - Motorola V3m Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Transceiver Board Assembly

G
6809501A48-A
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery cover, battery, antenna, rear housing and battery tray as
described in the procedures
2. Lift the transceiver board assembly out of the front housing with the
disassembly tool. See Figure 10.
Figure 10. Removing the Transceiver PC board Assembly
3. To replace, insert the transceiver board assembly into the rear housing.
4. Carefully and gently press the transceiver board into position and until it snaps
into place.
5. Replace the antenna assembly, rear housing, battery, and battery cover as
described in the procedures.
November 03, 2006
.
PC Board
Disassembly
Disassembly Tool
051348a
27