Removing And Replacing The Rear Housing Cover - Motorola MPx220 Service Manual

Level 1-2 Service Manual

Removing and Replacing the Rear Housing Cover

1. Remove the battery door, battery, front housing cover, upper PCB, receiver, camera-
module FPC connector, and flush-light FPC connector as described in the procedures.
2. Use a screwdriver to remove the 6 screws from the rear housing cover as shown in Figure
17.
Figure 17. Removing the 6 Screws from the Rear Housing Cover
3. Disconnect the rear housing cover from the rear housing as shown in Figure 18.
Figure 18. Removing the Rear Housing Cover
4. To replace, align and connect the rear housing cover to the rear housing.
5. Use the 6 screws to fasten the rear housing cover to the rear housing.
6. Replace the flush-light FPC connector, camera-module FPC connector, receiver, upper
PCB, front housing cover, battery, and battery door as described in the procedures.
December 22, 2004
Disassembly
27