Motorola V3m Service Manual page 39

Level 1 and 2 Service Manual
6809501A48-A
5. Carefully lift the display assembly away from the flip assembly (see Figure 22).
Display Assembly
Figure 22. Removing the Display Module Assembly
6. To replace, align the display module assembly to the flip assembly.
7. Carefully lower the display module into the flip assembly. Ensure that all of
the display none of the display assembly components are damaged.
8. align the flip display flex to the flex connector on the flip display assembly and
gently press down on the flex connector until properly seated.
9. Replace the camera assembly, flip assembly cover, transceiver board, rear
housing, antenna, battery, and battery connector as described in the
procedures.
November 03, 2006
Disassembly
Disassembly Tool
39