Motorola V3m Service Manual page 54

Removing and Replacing the Hinge Assembly
54
12. Carefully press the camera assembly into its slot in the flip (see Figure 46).
Figure 46. Reinstalling the Display Assembly
13. Insert the end of the camera assembly flex cable into its slot in the ZIF
connector on the flip display assembly. Avoid damage to the flex cable.
14. Carefully insert switches into button cavities (see Figure 47a and 47b).
A
Figure 47. Replacing Switches in Button Cavities.
November 03, 2006
V3m
062046o
B
062047o, 062048o
6809501A48-A