Product Overview; Features - Motorola V3m Service Manual

Product Overview

Product Overview

Features

1. All talk and standby times are approximate and depend on network configuration, signal strength, and features selected.
10
Motorola V3m mobile telephones feature Code Division Multiple Access (CDMA)
technology. The mobile telephone uses a simplified icon and Graphical user
interface (GUI) for easier operation, allow Short Message Service (SMS) text
messaging, and include clock, alarm, datebook, calculator, and caller profiling
personal management tools. The V3m telephones include a built in camera. The
phone provides 32 Embedded ring tones including VibraCall vibrating alert and 32
Downloadable/Customizable iMelody ring tones. The V3m telephones are dual band
that allows roaming within the CDMA 800 MHz and PCS 1900 MHz bands.
The V3m CDMA phones consist of a main housing assembly and a flip assembly.
The main circuit board, battery, headset jack, and accessory connector are located
in the main housing assembly. The camera on the V3m phones is located in the
hinged flip assembly.
The flip assembly contains the entire hinge mechanism. It is attached to the main
housing by four screws. The main display is on the inside of the flip assembly and
a one line LED display on the outside of the flip assembly. The main display on the
V3m phones is a 176 x 220 pixel 65k TFT LCD. The external CLI display is a 96 x
80 pixel 65K CSTN LCD. The camera module is a 1.3 mega-pixel, VGA CMOS
camera.
The main housing assembly includes a battery cover, chassis, main circuit board,
keypad plastic front housing, and internal antenna.
The main circuit board contains the Receiver, Transmitter, Synthesizer and Control
Logic Circuitry which together comprise the dual band tri-mode phone electronics.
The telephones are made of polycarbonate plastic. The display and speaker, as well
as the 18-key keypad, transceiver printed-circuit board (PCB), microphone, charger
and headphone connectors, and power button are contained within the flip form-
factor housing. The 740 mAh Lithium Ion (Li Ion) battery provides up to 180
minutes of talk time in CDMA mode with up to 195 hours of standby time
V3m telephones use advanced, self-contained, sealed, custom integrated circuits to
perform the complex functions required for CDMA communication. Aside from the
space and weight advantage, microcircuits enhance basic reliability, simplify
maintenance, and provide a wide variety of operational functions.
Features available in this family of telephones include:
• Built in VGA Camera (1.3 Mega-pixel)
• Video capture and playback
• 65K Thin Film Transistor (TFT) Active Color Display
• External color CLI Display
• Enhanced VST - Speaker independent calling
• Speaker Phone
• Stereo Headset support
• Class 2 Bluetooth®
• 23MB User Memory
• Micro-SD removable memory
November 03, 2006
V3m
1
.
6809501A48-A