Disassembly
26
3.
Use the disassembly tool to release the antenna assembly starting from the
right side as shown in Figure 9.
Antenna assembly
Figure 9. Removing the Antenna Assembly
4.
Carefully lift the antenna assembly away from the phone.
5.
To replace, align the antenna assembly to the phone.
6.
Carefully press the antenna assembly into position starting from the left side
until the antenna assembly latches snap into position.
7.
Reinstall the rubber antenna assembly grommets into their slots. Each
antenna grommet is uniquely shaped to fit into its respective position.
8.
Replace the rear housing assembly, battery and battery cover as described in
the procedures.
November 03, 2006
V3m
060663o
6809501A48-A