Motorola V3m Service Manual page 51

Level 1 and 2 Service Manual
6809501A48-A
6. Install the 2 end caps for the assembly flip. Ensure that the end caps and
grounding clip are assembled (see Figure 41).
Figure 41. End Cap Reinstall
7. Use the T-3 driver to install and tighten the 2 screws to a final torque setting
of 9.6 Ncm (.85 inch pounds). Do not over tighten (see Figure 42).
Figure 42. Reinstalling the Screw Caps
November 03, 2006
Removing and Replacing the Hinge Assembly
062006o
062005o
51