Motorola V3m Service Manual page 43

Level 1 and 2 Service Manual
6809501A48-A
Removing the 2 flip assembly screw caps.
8. Use a T-3 driver to remove the 2 screws from the flip assembly (see Figure 29).
Retain the screws for reassembly. Ensure the screws have thread lock.
Figure 29. Removing the Screw Caps
9. Remove the 2 end caps from the assembly flip. Retain the end caps and
grounding clip for reassembly (see Figure 30).
Figure 30. Screw Caps Removed
10. Use a small flat tip screwdriver to assist in disassembling the flip from the
base housing.
November 03, 2006
Removing and Replacing the Hinge Assembly
062045o
062006o
43