Removing And Replacing The Display Module Assembly - Motorola V3m Service Manual

Disassembly

Removing and Replacing the Display Module Assembly

G
38
1. Remove the battery cover, battery, rear housing, antenna, transceiver board
assembly, flip assembly cover, and camera assembly, as described in the
procedures.
The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.
2. Use the disassembly tool to unseat the display module assembly flex connector
from its socket (see Figure 21).
Display Flex Connector
Figure 21. Display Module Assembly Flex Connector
3. Carefully and gently lift one corner of the display module assembly out of the
flip assembly.
4. Avoid damage to the electrical components on the flex while carefully removing
the display module assembly from the flip assembly.
November 03, 2006
Disassembly Tool
6809501A48-A
V3m
051353o