Removing And Replacing The Rear Housing - Motorola V180 Service Manual

Digital wireless telephone, gsm 850/900/1800/1900 mhz, gprs

Hide thumbs Also See for V180:

Table of Contents

Disassembly

Removing and Replacing the Rear Housing

This product contains static-sensitive devices. Use anti-static handling procedures

to prevent electrostatic discharge (ESD) and component damage.

Remove the battery cover, battery, SIM, and antenna as described in the

procedures.

In addition to 4 screws, the rear housing assembly is fastened with plastic latches.

These are fragile and should be released with care.

Use the metal tweezers to remove the two rubber screw covers near the

antenna. Retain the screw covers for reassembly.

Using a Torx driver with a T-6 bit, remove the 4 screws at each corner of the

rear housing. Retain the screws for reassembly. See Figure 5.

Figure 5. Removing the rear housing screws

Release the two housing latches on each side of the phone by inserting the

pointed end of the plastic disassembly tool into the openings on the rear

housing.

July 08, 2004

Rear Housing Screws

V180

040208o

6809485A79-O

Table of Contents