Removing And Replacing The Rear Housing - Motorola UMTS 850 Service Manual

Disassembly

Removing and Replacing the Rear Housing

G
G
18
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery cover, battery, USIM and memory card as described in the
procedures.
In addition to 2 screws, the rear housing assembly is fastened with plastic latches.
These are fragile and should be released with care.
2. Using a Torx driver with a T-6 bit, remove the screws at each side of the phone.
Retain the screws for reassembly. See Figure 4.
Figure 4. Removing the Rear Speaker Housing Screws
May 09, 2007
Housing Screw
Housing Screw
6809505A64-A
V3xx
061425o