Removing And Replacing The Rear Housing - Motorola V3 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Rear Housing

G
G
6809485A72-O
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1. Remove the battery cover, battery, and SIM as described in the procedures.
In addition to 2 screws, the rear housing assembly is fastened with plastic latches.
These are fragile and should be released with care.
2. Using a Torx driver with a T-5 bit, remove the screws at each side of the phone.
Retain the screws for reassembly. See Figure 4.
Figure 4. Removing the rear housing screws
July 30, 2004
Disassembly
Housing Screw
Housing Screw
040701o
23