Disassembly
Removing and Replacing the Rear Housing
G
G
22
This product contains static-sensitive devices. Use anti-static handling procedures
to prevent electrostatic discharge (ESD) and component damage.
1.
Remove the battery cover, battery, and SIM as described in the procedures.
In addition to 4 screws, the rear housing assembly is fastened with plastic latches.
These are fragile and should be released with care.
2.
Using a Torx driver with a T-5 bit, remove the 6 screws along the sides of the
rear housing. Retain the screws for reassembly. See Figure 9.
Housing screws
Figure 9. Removing the Rear Housing Screws
3.
Lift up the rear housing as shown in fig 1 and insert the flat end of the
disassembly tool into the opening.
March 13, 2007
Housing screws
Z6
051855o
6809506A96-O