Removing And Installing The Processor - EUROCOM A110SU Service Manual

Removing and Installing the Processor

Processor Removal Procedure
1. Remove the rear top cover (page 2 -
2. The CPU heat sink unit is located at point
3. Loosen the heat sink unit screws in the order
4. You can then remove the heat sink unit
a.
c.
B
7).
.
( )
Figure 13a
A
, , ,
( Figure 13b
4 3 2 1
off the computer
( Figure 13c
B 6
b.
A
To remove the heat sink unit, loosen the screws in
the order
the heat sink unit itself).
The heat sink, and CPU area in general, contains parts which are subject to
high temperatures. Allow the area time to cool before removing these parts.
.
)
.
)
1
4
3
2
, , , (there are numbers on
4 3 2 1

Caution
Removing and Installing the Processor 2 - 19
Disassembly
Figure 13
Processor
Removal
a. Locate the heat sink.
b. Loosen the screws in
the order indicated.
c. Remove the heat sink
unit.

B. Heat Sink Unit