USER'S MANUAL - OPERATIONS COMMON TO ALL MODES
REMOTE OPERATION OF THE
MACHINE
Overview
Remotely operate the machine on your computer.
You can operate the machine from the same panel as the machine's
operation panel that is displayed on your PC, with the same feel as
operating in front of the machine.
The remote operation function can only be used on one computer at
a time.
Operation
Before you can use the remote operation function, the following
preparation is required.
•
In "Setting mode", select [System Settings] → [Operation
Settings] → [Remote Operation Settings] → [Remote Software
Operation] and select [Allow] for [Operational Authority].
•
Connect the machine to the network.
•
Install a VNC application software (recommended VNC software:
RealIVNC) in your computer.
file://C:\Files\PM Files\COPIERS\CR3.5\Virgo II\Manuals downloaded from MFP\mx514...
Page 191 of 227
4/24/2014