USER'S MANUAL - OPERATIONS COMMON TO ALL MODES
◦
Those with a window
◦
Those with a lining
◦
Those with an uneven surface, finished with titling or
emboss
◦
Duplex envelopes or those with adhesive or other synthetic
material for sealing
◦
Hand-made envelopes
◦
Those containing air inside
◦
Those damaged with a crease, fold mark or tear
•
Envelopes with the corner gluing position on the back not
aligned with the corner edge should not be used as it may cause
creasing.
•
Print quality is not guaranteed in the area 13/32" (10 mm)
around the edges of the envelope.
•
Print quality is not guaranteed on parts of envelopes where
there is a large step-like change of thickness, such as on four-
layer parts or parts less than three layers.
•
Print quality is not guaranteed on envelopes having peel off
flaps for sealing the envelopes.
Important points when using embossed paper/label
sheets
•
The effect of asperity surfaces of embossed paper may affect
the print quality depending on the type of embossed paper.
For more information, consult the dealer or "SHARP Service
Department".
file://C:\Files\PM Files\COPIERS\CR3.5\Virgo II\Manuals downloaded from MFP\mx514...
Page 138 of 227
4/24/2014