USER'S MANUAL - COPY
COLLECTIVELY SCANNING A LARGE
NUMBER OF ORIGINALS
Overview
This function divides the originals into sets and feeds each set
through the automatic document feeder one set at a time when
copying a very large number of originals.
Use this function when you wish to copy all of the originals as a
single job but the number of originals exceeds the maximum number
that can be inserted.
This function is convenient when you wish to sort copies of a large
number of originals into multiple sets. Because all originals are copied
as a single job, you are saved the trouble of sorting the copies that
would be required if the originals were divided into separate copy
jobs.
When scanning originals in sets, divide the sheets so that no set has
more than the number of paper that can be loaded, and then scan
from the set with the first page.
The individual copy settings can be configured for each set of
originals to be scanned separately.
file://C:\Files\PM Files\COPIERS\CR3.5\Virgo II\Manuals downloaded from MFP\mx514...
Page 146 of 231
(JOB BUILD)
4/24/2014