Table of Contents
Advertisement
Programming a Taxable Department
1. Turn the control lock to the PGM position.
2. Complete the tax status table below by adding the status digits for each tax. Then enter
3. Press the @/FOR key.
4. Press the department key you wish to program, or press DEPT SHIFT and the
5. Repeat steps 2, 3 and 4 for each department you wish to program.
6. Press the CASH/TEND key to end programming.
Taxable Department Programming Flowchart
Taxable Department Programming Example
Set department 1 taxable by tax rate 1:
Press the CASH/TEND key to end programming.
The tax status you have entered will display and print on the printer:
ER-350II Electronic Cash Register v1.3
the resulting tax status code.
Taxable by Rate 1?
Taxable by Rate 2?
Taxable by Rate 3?
appropriate department if you are programming departments 9-16.
Repeat for each
Department
@/
FOR
SHIFT
Tax
Use DEPT SHIFT
Status
for depts 9-16
Code
@/
1
FOR
CASH/
TEND
DEPT.1
01-03-1999
000014
Yes = 1
+
No = 0
Yes = 2
+
No = 0
Yes = 4
+
No = 0
=
DEPT
DEPT
KEY
1/9
T1
PROGRAM TERMINATE
CASH/
TEND
0
16:36
00
Quick Setup • 15
Advertisement
Table of Contents
