Quick Department Programs; Department Taxable And Preset Status - Sam4s ER-180T Series Operator's And Programming Manual

Quick Department Programs

These steps allow you to quickly set tax rate 1 status and open enter/preset status for each
department. Refer to the complete department program instructions on page 52 if you need to
program status for additional tax rates or set any of the additional department options.

Department Taxable and Preset Status

Use the following steps to set the status for each department.
1. Turn the key lock to the P position.
2. To begin the program, enter 5 0 0 and press the SUBTOTAL key.
3. Press the Department key on the keyboard you wish to program:
4. To set a taxable open entry department,
5. To program additional Departments, repeat from step 3, or press the CASH/TEND
20  Quick Program Guide
5 0 0 SUBTOTAL
1
Enter 100 and press the X/TIME key, or
To set a non-taxable open department,
Enter 000 and press the X/TIME key, or
To set a taxable preset department,
Enter 101 and press the X/TIME key, or
To set a non-taxable preset department,
Enter 001 and press the X/TIME key, or
key to finalize the program.
CASH/TEND
(=)
1
0
1
0
SAM4s ER-180T Operator's & Programming Manual v1.4
X/TIME
0 0
(X)
X/TIME
0 0
(X)
X/TIME
0 1
(X)
X/TIME
0 1
(X)