Table of Contents
Advertisement
- (Minus) Key Programming
The - (Minus) key is used to enter the amount of a coupon that is subtracted from the sale.
•
•
Programming the - (Minus) Key
1. Turn the control lock to the PGM position.
2. Enter the High Digit Lock Out (entry limit) digit from the table below. (Enter 0 for no
3. To decide if tax is calculated before or after the percentage is applied, complete the
4. Enter:
5. Press the - (Minus) key.
6. Press the CASH/TEND key to end programming.
60 • Advanced Programming Instructions
The - (Minus) key can programmed to be taxable or non-taxable. In other words, when
you are subtracting a coupon, you can calculate sales tax on the net or the gross cost of
the item. If the - (Minus) key is taxable, you will calculate sales tax on the net cost of
the item. If the - (Minus) key is -non-taxable, you will calculate sales tax on the gross
cost of the item.
You can also program limit errors by setting the maximum amount that may be entered
into the - (Minus) key. For example, setting a 3 digit limit means the maximum you
can enter is $9.99. This is referred to as the High Digit Lock Out, or HDLO.
limit.)
HDLO
Limits
1
.01 - .09
2
.01 - .99
3
.01 - 9.99
4
.01 - 99.99
5
.01 - 999.99
6
.01 - 9999.99
0
.01 - 99999.99
table below by adding the status digits for each tax. Then enter the resulting tax status
code.
Calculate Rate 1 after
the Minus (-) key entry?
Calculate Rate 2 after
the Minus (-) key entry?
Calculate Rate 3 after
the Minus (-) key entry?
for active minus key
0
1
for inactive minus key
Yes = 1
+
No = 0
Yes = 2
+
No = 0
Yes = 4
+
No = 0
=
ER-350II Electronic Cash Register v1.3
Advertisement
Table of Contents
