System Initialization - Panasonic DBS 40 Manual
Digital business system
Hide thumbs
Also See for DBS 40:
- Installation manual (204 pages) ,
- Operating manual (289 pages) ,
- Installation manual (159 pages)
Table of Contents
Advertisement
Section 300~Installation
System Initialization
1. Confirm that the DBS power switch is
2. Plug the power cord into a dedicated 120V 15 amp AC wall outlet.
3. Set SW1 on the CPC card to RAMCLR (RAM Clear).
'igure 3-17. CPC memory clear switch
4. Turn the power switch on.
5. Once the bottom LED lamp on the CPC card stops flashing, set SW 1 on
DES-70-300
Note: A surge protector should be installed on the power cord.
As the system loads, the bottom LED lamp on the CPC card will flash.
.
the CPC to RAMHOLD.
DBS Manual - Issued 8/l/95
Chapter 3. Cabinet Installation
OFF.
3-l 7
Advertisement
Table of Contents
