Panasonic DBS 40 Manual page 118

Section 300~installation
Figure S-15. Cable punch-out plate
4. Mount the Door Box Adaptor on the wall using the three screws provided
5. Connect the trunk line(s) to the Door Box Adaptor, as shown in Figure 5-
6. Connect the Door Box, door opener, and sensor to the Door Box Adaptor.
DBS-70-300
with the unit.
16.
The "COD' connector is used for the Door Box and opener. The "C0.S"
connector is used for the sensor.
DBS Manual - Issued 8/l/95
Chapter 5. Peripheral Equipment
5-29