Installation - Panasonic DBS 40 Manual

Chapter 6. Double-Cabinet Systems

Installation

1. Install the trunk and extension cards according to the layouts shown in the
Note: The port numbers for each slot are fixed.
2. If you are using two MFR cards, cut Strap S3 on the second card.
Figure 6-7. Strap 3, MFR card
3. Using the cables provided, connect the CBL-M card in the master cabinet
6-10
Figures 5-l through 6-6.
I
to the CBL-S card installed in the slave cabinet.
Note: The EM1 filter must be installed as close to the cabinet as possible,
as shown in Figure 6-8 on page 6-l 1.
DBS Manual - Issued 8/l/95
Section 300~installation
DBS-70400