Panasonic DBS 40 Manual page 59

Chapter 4. Trunks and Lines
Trunk Assignments for Single-Cabinet Systems
l
Table 4-9. Tl and analog trunk assignments, DBS 40
Table 4-10. Tl and analog trunk assignments, DBS 72
Trunk
4-14
Programming is not required to associate trunk ports with slot locations.
However, you must use programming to specify that a combination of Tl
and analog trunks are instailed, and you must also specify how many Tl
used.
channels are
Trunk
Number
1
I
8
9
16
Note: Since the DBS 40 supports a maximum of 16 trunks, all 24 chan-
nels of the Tl cannot be used.
Number
8
16 Tl channel 9
17
24
using 16 Channels
Fractional Tl
using 16
Channels
Analog trunk 1
Analog trunk 8
Section 300~Installation
Fractional T 1
using 8 Channels
Analog trunk 1
I
Analog trunk 8
1
Fractional Tl
using 8 Channels
Analog trunk 1
Analog trunk 8
Analog trunk 9
Analog trunk 16