Panasonic DBS 40 Manual page 30

Chapter 3. Cabinet Installation
4. Attach the mounting brackets to the four comers of the back side of the
Figure 3-2. Cabinet mounting bracket
5. Install four screws in the wall studs according to the dimensions given in
.
Figure 3-3. Cabinet wa
6. Hang the cabinet on the wall by placing the mounting brackets over the
7. Tighten the screws to secure the cabinet.
3-4
cabinet.
Figure 3-3. (Note that the width dimension is different for the DBS 40.)
The screws are used to attach the mounting brackets to the wall. The
screws should protrude from the wall 5/16 in.
screws.
DES Manual - Issued 8/l/95
Stud
Section 300-Installation
DBS-70-300