Table of Contents
Advertisement
22
1.888.610.7664
Fetching data from external FLIR
meters
22.1 General
You can fetch data from some external FLIR meters that support Bluetooth and merge
this data into the infrared image. When the camera is connected to a FLIR meter via
Bluetooth, the measurement value from the meter is displayed in the result table of the
camera. The FLIR meter value is also added to the information saved in the image file.
In preview mode and when editing an image in the archive, you can add more than one
value from the same FLIR meter. The last added value is displayed below the previous
values. The live value is displayed with a dotted outline.
If the screen display for values is full, it is still possible to add more values from the FLIR
meter. Added values are then indicated by a box with a number that counts up each time
a new value is added.
To find out whether a FLIR meter is supported by the camera, consult the meter
documentation.
22.2 Technical support for external meters
Technical support
Website
22.3 Procedure
Note
• Before you can use a FLIR meter with the camera, you need to pair the devices. For
more information, see section 21 Pairing Bluetooth devices.
• To add more than one FLIR meter value when saving an image, preview mode must
be enabled. Select
saving = On.
Follow this procedure:
1. Turn on the camera.
2. Turn on the FLIR meter.
3. On the FLIR meter, enable Bluetooth mode. Refer to the user documentation for the
meter for information on how to do this.
4. On the FLIR meter, choose the quantity that you want to use (voltage, current, resist-
ance, etc.). Refer to the user documentation for the meter for information on how to
do this.
Results from the meter will now automatically be displayed in the result table in the
top left corner of the infrared camera screen.
5. On the camera, in preview mode and when editing an image in the archive, you can
do the following:
• Push the programmable button to add the value currently displayed by the FLIR
meter.
• Push and hold the programmable button to remove all FLIR meter values from the
image.
Note Any function assigned to the programmable button is temporarily disabled
when in preview mode or when editing an image in the archive.
www.calcert.com
15
10
20
5
25
0
30
#T810587; r. AD/90967/90989; en-US
http://support.flir.com
(Settings) > Save options and storage > Preview image before
sales@calcert.com
109
Advertisement
Table of Contents
