Zipper Sewing - Toyota 9600 Instruction Book

16. ZIPPER SEWING

Set machine as shown.
Used for dresses, blouses skirts, trousers, bags,
etc.
By using the special zipper foot, zipper sewing can
be easily done.
(1) With right sides together, tack along seam line
of the opening
@ .
(2) Open the tacked seam and pull out the lower
material O.3cm (Va"). Place the folded edge over
the right side of the zipper and tack over it.
(3) Replace the presser foot with the zipper foot
on the left of the needle. The zipper foot can be
shifted either to the right or the left of the zipper,
so the zipper can be sewn without difficulty. Stitch
from the bottom to the top. Remove the tacking.
(4) Turn the material to the right side. Ease the
material and the zipper. Tack a measured 1.3cm
(V2") from the tacked seam as a stiching guide. Shift
the zipper foot to the right of the needle. Double-
stitch across the lower end, then up along the
zipper. Remove the tacking.
..a...a....a..
-27-
O.3cm ('Ia")