C.3.5.4 Extended Print Parameters With Ipf Option Installed - Image Access WideTEK 36 DS Manuals

C.3.5.4 Extended print parameters with iPF option installed

After activating the option for Canon iPF printer the number of printing parameters will be
extended.
The following additional parameters are available.
Parameter
Data Format
Model
Scaling
Bidirectional Print
Paper Feed
Roll Width
Orientation Feed
Media Group
Media Type
Borderless Printing /
Margins (1/10 mm)
Note: While using a Canon imagePROGRAF iPF825 printer and printing with 400 to
600 dpi an error message can occur.
This message does not stop the printing process and does not have any
influence at the printing result.
The message can be ignored.
Manual
Description
After installing the option the list of data formats is
extended by
Canon iPF Series
Changing the data format will also change the options.
Lists the supported Canon iPF printers.
Offers a list of scaling values for the image to be printed.
Yes / No
Select between Manual Feed and Roll.
Offers a list of paper widths; depends on the printer.
Short Edge / Long Edge. Depends on selected roll
dimension.
List of paper types.
List of specified papers, depending on the selected media
group.
Yes: Activates borderless printing. The input fields for
the margins will not be displayed.
No: The input fields for the margins will be displayed.
Page 83