Image Access WideTEK 36 DS Manuals page 88

Mail Server, continued
Parameter
Address
Port (25)
Server Authentication
Login
(if Server Authentication = Yes)
Password
(if Server Authentication = Yes)
Protocol
Connection Timeout
Use LDAP Directory
Service?
File Name
(only with automatic)
Recipient
(only with automatic)
Sender
(only with automatic)
Mail Subject
(only with automatic)
Reply To
(only with automatic)
Force disposition
notification?
(only with automatic)
Configuration Test:
Note: Each change to an entry field is transferred to the scanner immediately.
Page 88
Description
Enter the IP address of the outgoing mail (SMTP/LMTP)
server.
Enter the IP Port of the outgoing mail server.
Default: Port 25.
Select Yes or No. Set to YES if the mail server requires an
authentication.
Enter the user name for authentication at the outgoing mail
server.
Enter the password for authentication at the outgoing mail
server. The password is stored using encryption.
Choose the connection protocol. SMTP is the most
common protocol.
Choose the timeout for connecting to the outgoing mail
server before the connection is aborted.
LDAP directory service can be used to send the mails. To
configure the parameters click on the link Options.
Enter the file name. Variables can be used to complete the
file name. To learn more about the variables, click on the
link Wildcard characters.
Type in the recipient of the e-mail.
Format: fully qualified e-mail address.
Type in the sender of the e-mail.
Format: fully qualified e-mail address.
Type in the e-mail subject. (Optional)
Variables can be added to the mail subject. To learn more
about the variables, click on the link
Type in a reply address for answers. (Optional)
Format: fully qualified e-mail address.
Request for a notification when the recipient has opened
the mail.
Note: This feature is not supported by all mail servers or
clients.
Click on this link to test the settings. A separate window will open
and shows the test results.
Wildcard characters.
Manual