Ais Unit (Nqa-2103); Ais Process Unit (Nqa-2103) - JRC JMA-5912-6 Instruction Manual

11.10
Radar mode, synthesis mode
(1) Activation
(2) Display
(3) Alarm
Synthesis mode
(4) Another ship track

AIS PROCESS UNIT (NQA-2103)

100 target
MANUAL/AUTO(by two automatic activation/activation zone)
300 target (sleeping target and activated target)
AIS data: 2 at the same time. (simple display)
The ship's name, call sign, MMSI, course, speed, CPA, TCPA of target
can be displayed. (simple display item)
The ship's name, call sign, MMSI, course, speed, CPA, TCPA, bearing,
range, ship's heading bearing, rate of turn, latitude, longitude,
destination, navigation status of target can be displayed. (detail display
item)
Vector display: True/Relative
Past position
The message can be displayed. (broadcast message, addressed message)
Automatic activation/activation zone
Danger ship: Depends on CPA/TCPA setting.
20 targets. 1500 point per one target can be displayed.
(Own ship track and marks are another.)
Display color: 7 colors
(The display color of each target can be set.)
(The display color of all targets can be set by the batch. In this case, the
display color is one color.)
Interval of save: 3/5/10/30 sec, 1/3/5/10/30/60 min, 1/3/5/10 NM
Possible to storage in memory card (Option).
11-11