Basic Transmission Procedure - Kyocera ECOSYS M3540idn Operation Manual

Sending Faxes > Basic transmission procedure

Basic transmission procedure

The basic procedure for using the fax system is explained below.
1
Press [FAX] on the Home screen.
FAX
2
Place the originals.
3
Select the transmission method.
Ready to send.
FAX
On Hook Chain
0123456789 0123456789
Address Book Ext Address Book
Functions
4
Specifying destination.
Ready to send.
FAX
On Hook Chain
Address Book Ext Address Book
Functions
The base screen for fax appears.
There are two transmission methods: memory transmission and direct
10:10
Dest. :
transmission.
Check
Direct
Memory transmission: The original is scanned into memory before
Add Dest.
communication starts. Memory transmission is selected by default.
Direct transmission: The destination is dialed and communication
One Touch Key
starts before the original is scanned.
Favorites
Press [Direct] to change the transmission method to direct
transmission. The key will be highlighted on the touch panel. If the
[Direct] is pressed in the highlighted state, the transmission method will
change to memory transmission.
Specify the transmission destination.
10:10
Dest. :
Check
Direct
Recall Add Dest.
One Touch Key
Favorites
Refer to the machine's Operation Guide for placing originals.
For details, refer to FAX Direct Transmission on page
For details, refer to Methods For Entering the Destination on page
3-2
3-21.
3-8.