Kyocera ECOSYS M3540idn Operation Manual page 29

Before Using the Fax Machine > Registering Destinations in the Address Book
5
1
Press [Detail Settings].
FAX
Sub Address
0123456789
Pause Space
Cancel
2
2 Press [TX Start Speed], [ECM] and [Encrypted Transmission] and set each item then
press [OK].
FAX - Detail Settings
TX Start Speed
ECM
Encrypted Transmission
Cancel
Key
Detail Settings TX Start Speed
ECM
Encrypted
Transmission
Set a sub address.
To use sub address communication, a sub address and password must be registered.
1
Press [Sub Address].
FAX
Sub Address
0123456789
Pause Space
Cancel
10:10
Detail Settings
Backspace
OK
10:10
33600bps
On
1/1
Off
OK
This is set to change the transmission start speed.
Select the speed from 33,600 bps, 14,400 bps, and 9,600
bps.
NOTE
Normally the default setting should be used.
ECM is a communication mode specified by the ITU-T
(International Telecommunication Union) that retransmits
data when an error occurs. Fax machines that have ECM
mode check for errors as they communicate, preventing
distortion of the image due to noise on the line and other
conditions.
This is set when using encrypted transmission to send the
data.
For details, refer to
page 5-28.
10:10
Detail Settings
Backspace
OK
2-14
Description
Using the Encrypted Transmission on