Flow Of Reception; Canceling Reception (Disconnection Of Communication) - Kyocera ECOSYS M3540idn Operation Manual

Receiving Faxes > FAX Automatic Reception

Flow of reception

1
.
2

Canceling reception (Disconnection of communication)

When you cancel receiving by disconnecting the telephone line during communication, use the following procedure.
1
2
Reception Starts
When a fax comes in, the [Processing] indicator blinks and reception automatically begins.
NOTE
You can change the number of times the ringing tone rings. (Refer to
Memory Reception
When the machine cannot print a fax due to paper running out or a paper jams, it temporarily
stores originals that have been sent in the image memory. When the machine returns to the
printable state, printing starts.
The number of pages that can be stored depends on the pages. As a general guideline, about
256 or more A4 size pages at normal resolution can be stored.
During memory reception, FAX Reception Printing Jobs are displayed on Printing Jobs of the
Status screen. To print the received originals, supply paper or remove jammed paper.
For the Status screen, refer to the machine's Operation Guide.
Reception Print
Received faxes are output to the inner tray with the printed side facing down.
Press the [Status/Job
Disconnection of communication.
1
Press [ ] and then [FAX].
2
Press [Line Off]. When communication is disconnected, reception stops.
Cancel] key.
4-3
FAX on page 8-7.)